Q-NOTE QN-7000HX User's Guide download pdf (Page 66)

Open Problem Reports and Feature Exceptions

page 66 OmniSwitch 6600/7000/8800—Release 5.1.6.R02

PR 60125

The tag value cannot be changed from the VLAN number on an OS7000 series switch. This is a hardware

limitation.

Workaround: There is no known workaround at this time.

PR 60680

On an OS7000 series switch, if a single MAC address of a single device is attached to a single port on the

switch and is generating multiple SNAP types with a non-zero vender identification, one is unable to

create VLAN protocol rules to isolate each generated SNAP type into its own VLAN.

Workaround: There is no known workaround at this time.

PR 60983

Changing the IP address on workstations connected to a hub will not force the workstation MAC address

to drop from a VLAN that it has already qualified for by a network address rule, to join a new network

address-ruled VLAN on an OS7000 series switch.

Workaround: Follow the instructions below:

1. Remove the hub connection from the switch and re-attach.

2. Connect workstations directly to the switch and reboot the workstation when the IP address changes are

made.

3. Let the MAC address for the station age out of the switch CAM.

PR 61740

On OS7000 mobile ports, stations using the IP address range after a station has “autoconfigured itself” will

not be learned.

Workaround: The user must perform a release and renew to recover the DHCP-provided IP address. The

use of autoconfiguration (aka Automatic Private IP Addressing) is not recommended within an enterprise

network environment.

PR 61994

When traffic violates a port-protocol binding rule, source learning does not indicate by VLAN which rule

was violated on an OmniSwitch 8800 switch.

Workaround: There is no known workaround at this time.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 114 115

No comments

Q-NOTE QN-7000HX User's Guide Page 66